PT-3050 TABER 磨耗試驗機
TABER ABRSION TESTER
CNS 3309;6843;8540 JIS K6902;K7204 ASTM D1175;D1044
◆ Functions: This machine is suitable for abrasion-resistant tests on leather, cioth, paints, paper, brick,
plywood, glass, natural rubber, etc. The method is to use standard cutting knife to cut test piece.
Then use regulated type of grinding wheel and load certain weight to abrade.
Remove out the test piece after it is abraded for regulated tuming times.
Observe the condition of the test piece after abrasion or the difference of weights before and after abrasion.
◆ Calculating formula for abrasion index: Lost weight of abrasion/circling times×1000
◆ Selective grinding wheels: H18, H22, CS17, S32, S33
◆ Specification:
Load: 250g, 500,1000g
Counter: Electron indication 6 numbers; energy off automatically.
Testing disk turning speed: 60 rpm (or indicated)
Size of machine: 33×43×30㎝
Accessories: Dust collector 1 set, knife 1 piece, wrench 1 piece, grinding wheel 1 set, sand paper 1 package.
Power: 1 ø, 110V/60HZ or 1 ø220V/50HZ
A reference: grinding wheels for different test pieves:
PAint |
Plwood |
Plastic |
Cloth |
CS10, CS17 |
CS32, CS33 |
H18, H22, CS17 |
H18, H22, CS17 |