PT-3110 熱壓成型機
Molding Test Press
PT-3110-A PT-3110-B
CNS 4395, 10011
◆ Functions: Put plastic or rubber material in the mold. Press the material between the
adove and below electron heating board. Add on pressure and heat to form the material.
The formed product may de used for testing, comparing colors, or as samples.
This may be the accordance of largely production of adapted should also be factories.
Type |
A |
B |
Pressure |
10, 30, 50 tons (selective) |
|
Pressure area |
30×30㎝ |
25×25㎝ |
Temperature |
Normal temp,~300℃, electron indication |
|
Timer |
0~999 mins. , electron indication |
|
Pressure indication |
Electron oil pressure |
Hand-operated jack |
Pressure indication |
Pressure gauge (Electron indication purchased separately) |
|
Selective purchase item |
Auto water freezing device |
|
Size of machine |
100×70×150㎝ |
47×62×128㎝ |
Weight of machine |
380㎏ |
230㎏ |
Power |
1 ø, 220V, 50 or 60HZ. |